G1 EBOXX

QLFLINE

from 7299.00€

NICOLAI has been building mountain bikes for over 20 years, and for over 10 years electric assisted ‘eMTB’. The question “Who needs that?” or the quote “I am still too fit for that,” is rarely heard today. Why? Because people who are interested in e-bikes quickly learn that riding an eMTB is still sport. The advantages are obvious: differences in fitness between friends are levelled, the range is increased and ultimately, you can have longer riding time and pleasure. For this year, Nicolai’s eMTB called the G1-EBOXX is developed and produced precisely for this riding experience. This is a special product because Nicolai is one of the few remaining companies to produce bicycle frames in Germany. In our own factory, all components are CNC-milled from high-quality aircraft aluminium and precisely welded together. The high-quality welding beads have established themselves as a trademark in the industry. A Nicolai bike can therefore also be recognised without a logo. All in all, the bike has unrivalled and incomparable riding performance. The reason lies in the sum of all the (big) little things, which we would like to explain now:

BOSCH CX

GEN 4

The new BOSCH mountain bike engine was expected with a lot of excitement. This 4th engine generation was tested in secret for many months. Smaller, lighter, stronger and quieter are the 4 facts that summarize everything. With 2.9 kg, the engine is one of the lightest on the market. With a torque of 75 Nm, it is also one of the most powerful engines. The special MTB software ensures the finest response and performance in off-road conditions.

BOSCH KIOX

EFFECTIVE WITH BOSCH

Nicolai reflects on a long and close cooperation with the technology company Bosch. Therefore we continue to use the strong Bosch CX motor with specially-tuned mountain bike software in the EBOXX bike. New for 2019 is the KIOX on-board computer with all the functions a real rider needs.

5 Frame Sizes

Flexible Production

The manufacturing of Nicolai products in Germany gives Nicolai the necessary flexibility to adapt its products to the special needs of its customers. A correct posture on the bike can only be achieved by selecting the right frame size. The 5 frame sizes S,M,L,XL and XXL offer the right product for every customer between 1.55 and 2.10 meters tall.

Suspension

PAYLOAD OF UP TO 150 KG

The rear end of a mountain bike chassis is not a structural rigid component. It is exposed to extreme loads during off-road driving. That’s why we only use the best suspension components from the US specialist Fox. Typical critical points are also the ball bearings, which ensure low breakaway torque and optimum response in the joints.

#GEOLUTION

“We don’t care about trends! All that matters is lap times, riding pleasure, safety and the physical facts.” This quote is our approach to the development of new mountain bikes. This mission statement has made us one of the most innovative bicycle companies in terms of chassis performance, steering dynamics and geometry.

ANGULAR CONTACT BEARINGS

4 WAY SEALED

The rear end of a full suspension bike is not a statically rigid component and is exposed to extreme loads during riding. Critical points are the ball bearings, which ensure a low breakaway torque and optimum response of the chassis. In order to extend the maintenance intervals of the frame, we exclusively use full complement, double sealed ball bearings for Nicolai products.

7020-T6 Aluminium

Aluminium is not Aluminium

We at Nicolai exclusively use the alloy 7020-T6 (AlZn4,5Mg1) for our frames. Compared to our competitors, who mostly use aluminium 6061-T6, this grade has much better strength values.

Swing Mutator

The MUTATOR is a newly developed component on the rear swing arm, which combines many functions in a single component:

The mutators are available in different lengths (33, 41 und 47mm). In this way, only by replacing a mutator can the length of the swingarm “grow with” the frame height according to the GEOMETRON concept.

Welding Technology

A NICOLAI IS ALWAYS RECOGNIZABLE BY ITS WELDS.

For each model and each frame size we have designed its own welding device, a so-called frame gauge. Here, the pipe sets and the turned and milled parts fit together precisely, in order to be tacked by our welders at precisely defined points and in exact sequence, and then welded in several passes by TIG (tungsten inert gas) in order to minimize distortion and distortion. Our evenly flat scaled welds are produced by a very slow welding speed and, unlike with applied seams, cause a deep fusion of the material.

color variety

Extralove

With a NICOLAI frame, you decide the design. Every Nicolai frame can be produced in any colour according to your preferences. Choose from different frame colours, anodised colours for reversing levers and pull holders as well as frame decor to add your individual touch to the frame.

Rado

Rear Aligning Dropout

So that you can hit every lane on the trail, we mount a form-fit sliding, exchangeable dropout for track and camber adjustment on all frames. Due to the differently milled, right dropouts for adjusting the lintel, the rear only needs to be slightly readjusted after installation. This takes the strain off the material. The respective lintel height is milled into the RADO with the digits 0, 1, 2 or -1 and -2. After the toe and camber have been set, the RADO is fixed ex works with a pin. This makes the original setting easily reproducible during replacement. This is the only way we can guarantee that NICOLAI products work precisely on the track.

TAILOR MADE

WE MANUFACTURE YOUR CUSTOM-MADE FRAME

You can order, pay for and pick up your tailor made frame directly from us or from your Nicolai dealer. For technical details, please contact us directly. First we need to know why you want to ride a custom-made frame. Most of the reasons lie in the past.

MANUFACTURING QUALITY

Made in Germany

The manufacturing quality itself is not yet an added value for a customer. The following two added values “durability & precise driving characteristics”result from production quality. Only if the welds are welded deep into the root and have no notches, a bike frame can withstand the impacts from the ground for many years without breaking. Precise riding characteristics are achieved when the rear wheel is precisely straight to the front wheel and even a layman notices that an oblique bike rides strangely (but usually he thinks it’s because of his riding ability).

10 YEARS SPARE PARTS AVAILABILITY

If after a few years of hard work a bearing on a Nicolai frame needs to be replaced, a RADO needs to be replaced due to a fall or a frame needs a new coating, the NICOLAI service staff is the right contact. Since we at NICOLAI manufacture all small parts on our machines, we can also produce spare parts for older models if required. We therefore guarantee spare parts availability of at least 10 years for all Nicolai products.

G1 EBOXX QLFLINE

Frame

NICOLAI EBOXX 4

Fork

FOX RACING SHOX 36 Float 160 FIT4 Factory BOOST, 2019

Rear shock

FOX RACING SHOX VAN RC 210x55

headset

ACROS Block Lock

stem

HOPE AM 35mm/35mm

bar

ACROS Gothic 780/35 Rise 25mm

brake

MAGURA MT7, HC Bremshebel 203mm

grips

SQlab 70X - M

tire ft

CONTINENTAL Der Baron Projekt ProTection Apex 29x2,4"

tire bt

CONTINENTAL Der Baron Projekt ProTection Apex 27.5x2,6"

saddle

SQlab 611 Ergowave active - 140mm

seadpost

BIKEYOKE Divine 185mm

crank

Miranda 160mm

wheelset

HOPE Fortus 35 W Pro 4 29" BOOST - 9-spline - black - SET

sprocket

SRAM X-Sync 34T for Bosch

engine

BOSCH CX Performance Line

battery

BOSCH Power Tube 625 Vertical Black

Display

BOSCH KIOX

shifter

SRAM GX 11-fach

derailleur

SRAM GX Type2.1, 11-fach

cassette

SRAM NX PG-1130 10-42t, 11- fach

chain

SRAM Kette CN-PC1130

Pedals

ACROS A-Flat MD

Why NICOLAI ?