G1 EBOXX E14 Explorer Kit
E14 Explorer Kit
NICOLAI Front Fender
NICOLAI Front Fender
NICOLAI Twist Bottle Set
NICOLAI Twist Bottle Set
NICOLAI Twist Bottle
NICOLAI Twist Bottle
NICOLAI Twist Bottle Clamp
NICOLAI Twist Bottle Clamp
CG1 Chain Guide
CG1 Chain Guide
E14 Trigger Adapter
E14 Trigger Adapter
Nicolai Chainstay Protector
Chainstay Protector
FR14 cable guide
FR14 cable guide
Nicolai thru axle
Nicolai thru axle
Rado II Set
Rado II Set
Rado I - TA Set
Rado I - TA Set
Rado I - QR Set
Rado I - QR Set

Rado II Set

Scope of delivery: 1x Rado II + 4x screws

€35.60

Axle: 12mm thru axle

 

Execution: fixed

 

Position: Drive side

 

Mounting bracket: with rear derailleur bracket

 

Material: Aluminium (CNC-manufactured)

 

 

The Nicolai RADO II (Right Aligning DropOut) is a form-fitting, exchangeable drop-out for toe and camber adjustment. Due to the differently milled right dropouts for adjusting the camber, the rear only has to be readjusted slightly after assembly. This relieves the material. The respective camber height is milled into the RADO with the numbers +1, 0, -1 and -2. After the toe and camber have been adjusted, the RADO is fixed ex works with a pin, which remains firmly in the frame when the shift lug is changed. This means that the original setting can be easily reproduced when exchanging. This is the only way to guarantee that Nicolai products function precisely on the track.

 

Note:

The correction value required for your bike can be found engraved on the inside of the currently installed RADO. If you have a RADO without engraving, it is a RADO with the fall 0.

 

 

Type 1

Camber: 0
Position: Drive side
Mounting bracket: with rear derailleur bracket

 


Type 2 

Camber: +1
Position: Drive side
Mounting bracket: with rear derailleur bracket

 


Type 3 

Camber: -1
Position: Drive side
Mounting bracket: with rear derailleur bracket



Type 4 

Camber: -2
Position: Drive side
Mounting bracket: with rear derailleur bracket

NICOLAI GmbH

Configuration loading...